Mounting Surfaces; Sailboats; Power Boats - Raymarine RA1072HD Installation Manual

1.5 Mounting Surfaces

The digital radar unit can be installed on a mast platform, an arch, or
a bridge structure. Make sure that the platform surface is flat and
the units drain hole is not obstructed.
If there is any doubt concerning the appropriate type of hardware,
consult your boat dealer or representative for their
recommendations.

Sailboats

Depending on the type of sailboat, a radar guard should be installed
if the sails or any rigging could touch the digital radar or mounting
platform. Without a proper radar guard the mounting platform and
the digital radar could be severely damaged.

Power Boats

On many small vessels the digital radar unit can be installed on an
arch, or a bridge structure, but take care to follow the site
guidelines, particularly regarding height. If necessary, construct a
suitable mounting platform to obtain a sufficiently high mounting
position. Make sure that the platform surface is flat. Ensure the
platform is strong enough to support the maximum likely shock
loads of the radar whilst at sea.
15
D10486-1