Emc Installation Guidelines - Raymarine RA1072HD Installation Manual

1.2 EMC installation guidelines

Raymarine equipment and accessories conform to the appropriate
Electromagnetic Compatibility (EMC) regulations. This minimises
electromagnetic interference between equipment, which could
otherwise affect the performance of your system.
Correct installation is required to ensure that EMC performance is
not compromised.
For optimum EMC performance, we recommend that:
• Raymarine equipment and the cables connected to it are:
•
SeaTalk
hs
SeaTalk crossover coupler
(direct from digital radar)
VCM100
At least 3 ft (1 m) from any equipment transmitting or cables
carrying radio signals e.g. VHF radios, cables and antennas.
In the case of SSB radios, the distance should be increased
to 7 ft (2 m).
hs
switch
OR
Power
Radar
E series display
PAGE
ACTIVE
WPTS
MOB
DATA
MENU
OUT
RANGE
IN
OK CANCEL
9
GPS
antenna