Turn Your Phone On And Off - Sharp AQUOS Crystal Sprint User Manual


Inserting the micro USB plug in the wrong orientation may damage the charger/accessory
jack on the bottom of your phone. Insert after checking the contours and orientation of the
micro USB plug.
2. Insert the USB plug on the micro USB cable for PC into the USB port on your computer.
 After charging is complete, the LED goes out.

Make sure that the LED glows red (when the battery is almost fully charged, it glows green).
3. After charging, remove the micro USB cable from both the phone and the computer.

Turn Your Phone On and Off

The instructions below explain how to turn your phone on and off.
Turn Your Phone On
■
Press and hold the Power key.
 Your phone will power on. Depending on the settings, you may see the lock screen.

See Lock and Unlock Your Screen
lock.

The first time you turn the phone on, you will see the startup screens. See
Setup Screens

If your phone is not yet activated, see
Get Started
and
for details.
Activate Your Phone
Screen Lock for information about using the screen
for more information.
Complete the
18