Table of Contents
Advertisement
Printing
You can print with an app supporting the print function by
installing a print app (plug-in). To change settings on the
installed print app (plug-in), carry out the following operations.
Install a print app (plug-in) supporting a printer to use in advance.
1
In the home screen, [R]/[Settings]/[Printing]
2
Select a print service
: Follow the instructions on the screen and operate after this
step.
About phone
You can check the information about the handset.
1
In the home screen, [R]/[Settings]/[About
phone]
2
Select an item
Build
number: Check the build number.
Status: Check the battery level, network in use, etc.
Adjust touch
panel: Adjust the touch panel.
Adjust sensitivity of
sensor: Adjust the accuracy of retrieval
by the motion sensor and geomagnetic sensor.
Update: For details nP. 82 "Software update"
Software
Legal
information: Check copyright notice, terms of service,
etc.
Authentication: Check information such as the certification of
conformity with technical regulations.
Model
number: Check the model number.
Android
version: Check the Android version.
Baseband
version: Check the baseband version.
Kernel
version: Check the kernel version.
[Adjust touch panel]
Do not touch the touch panel (display) or H, while [DO NOT
TOUCH the display.] is displayed.
The adjustment may be failed since the sensitivity adjustment
for the whole touch panel is being performed.
[Adjust sensitivity of sensor]
Make the adjustment approximately 10 seconds after the
adjustment screen appears.
Adjustment may be failed depending on surroundings or other
simultaneously running apps. Change the place where you
make adjustment, end running apps, etc.
68
Handset Settings
Advertisement
Table of Contents
