Table of Contents
Advertisement
EXTERIOR EQUIPMENT
2. To
remove
the
fuel
counterclockwise by 90 degrees (to the pressure point
1
), and then turn it a additional 30 degrees (to point
Pause slightly before removing it.
It is not unusual to hear a slight swoosh when the cap is
opened.
126
tank
cap,
turn
the
cap
2
).
3. The removed cap can be stored on the back side of the
fuel filler door.
Position the cap so that the hooks point to the left and right, and
set it in the receptacle on the back side of the door.
When installing the cap, turn the cap clockwise until you
hear a click. When you hear the click, the cap is fully
closed.
If the cap is not tightened securely, the malfunction indicator
lamp comes on. Make sure the cap is tightened securely.
The indicator lamp goes off after driving several times. If the
indicator lamp does not go off, contact your Lexus dealer as
soon as possible.
Advertisement
Table of Contents
