18
en | Installing the Surveillance cabinet
3.5
Attaching the door
The bottom hinge pin of the door has a Hinge Pin Stop to hold the hinge open when you
attach the arm to the unit.
1.
2.
Notice!
Both Hinge Pins must be fully pushed to unlock the hinges of the door and before you
proceed to the next step.
3.
4.
Warning!
!
Serious injury or death can occur if the hinge pins of the door are not fully connected to the
unit. Exercise caution before releasing the door.
2017.09 | v1.0 | F.01U.250.239
Push the bottom hinge pin down and rotate it behind the Hinge Pin Stop.
Push the top hinge pin up and hold it.
Hold the top hinge pin open and align the top and bottom hinges of the door to their
mating points on the unit. See the illustration above.
When you have aligned the hinges, release the top hinge pin to connect with its mating
hinge on the unit. Then release the bottom hinge pin from the Hinge Pin Stop to lock the
door to the unit.
Installation manual
Surveillance Cabinet
Bosch Security Systems