To Set At A Desired Speed; To Deactivate; To Resume Speed; To Vary The Speed Setting - Dodge Challenger 2009 Owner's Manual

To Set At A Desired Speed

When the vehicle reaches the speed desired, push the
lever downward to SET DECEL and release. Remove
your foot from the accelerator pedal and the vehicle will
operate at the selected speed.
NOTE:
• Electronic Speed Control will only function in 3rd, 4th,
or 5th gear when in the Autostick
equipped).
• Electronic Speed Control may not engage if a different
size tire is installed on one wheel, such as the compact
spare tire.

To Deactivate

The system will disable Electronic Speed Control without
erasing the memory if you:
• Softly tap the brake pedal,
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131
• Depress the brake pedal, press the clutch pedal to the
floor (manual transmission), or
• Pull the speed control lever toward you to CANCEL.
Pushing and releasing the ON/OFF button or turning off
the ignition erases the set speed from memory.

To Resume Speed

mode (if If you deactivated the Electronic Speed Control without
erasing the set speed from memory and your vehicle
speed is above 20 mph (32 km/h), you can resume the
previous set speed. To do so, push the lever upward to
RESUME ACCEL and release. Then remove your foot
from the accelerator pedal.

To Vary the Speed Setting

When the Electronic Speed Control is set, you can in-
crease speed by pushing up and holding the lever in
RESUME ACCEL. When the lever is released, a new set
speed will be established.
3