Assembling Dust Elbow And Dust Bag - Porter-Cable 3807 Instruction Manual

A S S E M B LY
W ARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MITER SAW TO THE POWER
SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE READ A N D
UN DER STOOD THE ENTIRE OWNER S MANUAL.
B

ASSEMBLING DUST ELBOW AND DUST BAG

1 . Insert smooth end of dust elbow (A) Fig. 10, into opening (B). The dust elbow (A) can be rotated as desired.
2 . Compress spring clips ( C ) F i g . 11, on dust bag (D) and clip dust bag onto end of elbow (A) as shown.
MOVING TABLE TO THE 0 DEGREE CUT-OFF POSITION
1 . Rotate locking knob (A) Fig. 12, counterclockwise to unlock. Depress lever (B) and rota t e ta b l e ( C ) t o t h e 0
degree straight cut-off position, release lever (B) and tighten locking knob (A).
2 . F i g . 1 3 , i l l u s t r a t e s t h e table (C) in the 0 degree straight cut-off p o s i t i o n .
3 . For proper operation and adjustment of the ta b l e , r e f e r t o s e c t i o n s ,
CUTTING , ADJUSTING CLAMPING ACTION OF TABLE LOCKING MECHANISM
SLIDING FIT BETWEEN MOVABLE TABLE AND BASE.
B
A
Fig. 10
C
A
Fig. 12
ROTATING TABLE FOR MITER
7
D
C
Fig. 11
and ADJUSTING
C
Fig. 13
A