Using The Setup Wizard - Planet Networking & Communication MH-5000 Quick Installation Manual

Using the Setup Wizard

A computer on your LAN1 must be assigned an IP address and subnet mask from
the same range as the IP address and subnet mask assigned to the MH-5000, in
order to be able to make an HTTPS connection using a web browser. The MH-5000
is assigned an IP address of 192.168.1.254 with a subnet mask of 255.255.255.0 by
default. The computer that will be used to configure the MH-5000 must be assigned
an IP address between 192.168.1.1 and 192.168.1.253 with a subnet mask of
255.255.255.0 to be able to connect to the MH-5000. This address range can be
changed later. There are instructions in the MH-5000 User's Guide, if you do not
know how to set the IP address and subnet mask for your computer.
Open your Web browser and
type "http://192.168.1.254:8080"
or "https://192.168.1.254"into the
URL address box. Then press the
Enter or Return key.
Step 1 － Login
Type "admin" in the
account field, "admin" in
the Password field and
click Login.
Step 2 －
Setup Wizard
Click the Run Setup
Wizard.
After login to MH-5000 web configuration
Run
BASIC SETUP > Wizard
5