Removing And Replacing The Flexiblelom - HP ProLiant DL360 Gen10 Maintenance And Service Manual

To replace the component, reverse the removal procedure.

Removing and replacing the FlexibleLOM

1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect the LAN segment cables.
4. Do one of the following:
• Extend the server from the rack.
• Remove the server from the rack .
5. Remove the FlexibleLOM.
To replace the component, reverse the removal procedure.
Removing and replacing the FlexibleLOM 53