Standards And Approvals; Patents And Design Registration; Tools Required; Installation Requirements - Mira Advance Installation Manual

Standards and Approvals

The Mira Advance complies with the requirements of the BEAB Care Mark Standard
and the relevant directives for CE marking. The BEAB Care mark is invalid if the
product is not installed and used in accordance with the manufacturer's specifications
and instructions.
Hereby, Kohler Mira Ltd. declares that the radio equipment type Mira Advance
Flex Extra (J09N) is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet address:
www.mirashowers.co.uk.
The Mira Advance Flex Extra (J09N) operates in the 2.4 GHz frequency band at a
maximum radio frequency power of +4 dBm.

Patents and Design Registration

Design Registration:
Patents:

Tools Required

Installation Requirements

General
We recommend that the product be brought into the room where it is to be installed
and left to acclimatise to room temperature, this will reduce the possibility of
condensation on electronic components.
The shower works best when water supply conditions are stable and within the
specifications, refer to section 'Specifications'. If the supply conditions fall outside
the specifications, the shower may go into a safe shut down condition.
DO NOT connect the outlet of the shower to any tap, on/off control valve, trigger
operated showerhead or any other showerhead other than those specified for use
with this shower. This could cause scalding or severe damage to the product and
will invalidate the guarantee. Only Kohler Mira recommended showerheads, shower
hoses and accessories must be used.
1306246-W2-A
000738141: 0003, 0006, 0007, 0009
GB: 2269466, 2270370, 2298478, 2298479, 2298481,
2289323, 2359339.
Ireland: 80655, 83692.
8
6.0 mm