FMS 2000MM Beaver DHC-2 Operating Manual page 9

3.Secure the wings on the fuselage using 4 screws in the top of the wings. Make sure it is tightened enough.
HKM3.0×26mm
Removal
We recommend removing the wings from the fuselage for storage or transport of the aircraft.
1. Carefully apply CA to the base and side of the front main wing
2. Carefully place the Vortex Generator into the pocket
1. Carefully apply CA to the base and side of the air speed pocket.
2. Carefully place the Vortex Generator into the pocket.
3. Install the antenna on the top of the fuselage.
fig15
Required Adhesives:
fig16
fig17
8
Foam Safe Medium CA
fig18