Optional Float Installation - FMS 2000MM Beaver DHC-2 Operating Manual

Optional Float Installation

1. Install the strut bar to both sides of the float. The front bar is longer with 422mm length, the rear bar is shorter
with 412mm length. Wrong installation will cause difficulty landing and taking off (fig.24)
422mm
2.Install the float strut to the float with 8 screws as picture shows. (fig26)
3.With the fuselage bottom facing up, carefully install the float set to the fuselage with 6 screws.
412mm
fig23
fig24
HKM3.0×26mm
fig26
10
HKM3.0×26mm
fig25