Shure Sb900A Rechargeable; Battery - Shure AD2 User Manual

Shure Publications | User Guides | AD2
http://pubs.shure.com/guide/AD2/en-US
transmitters), must have the same MAJOR and MINOR
firmware version numbers (e.g., 1.2.x).
Updating the Transmitter
1. To upload the firmware to the transmitter, go to
Device Configuration > Tx Firmware Update on the
receiver.
2. Place the transmitter on its side and align the IR
ports.
3. Press ENTER on the receiver to begin the download
to the transmitter. IR ports must be aligned for the
entire download, which can take 50 seconds or
longer.

Shure SB900A Rechargeable

Battery

Shure SB900A lithium-ion batteries offer a rechargeable
option for powering the transmitters. Batteries quickly
charge to 50% capacity in one hour and reach full charge
within three hours.
Single chargers and multiple bay chargers are available to
recharge the Shure batteries.
Caution: Only charge Shure rechargeable batteries with a Shure
battery charger.
Shure SB900A Runtime
2 mW 10 mW
Up to 9 hours Up to 9 hours Up to 5 hours
35 mW
9/8/17, 2)16 PM
Page 11 of 32