Table of Contents
Advertisement
Shure Publications | User Guides | AD2
http://pubs.shure.com/guide/AD2/en-US
Bars: Indicates the number of bars
displayed
Time: Battery runtime
Charge: Percentage of charge
capacity
Health: Percentage of current battery
health
Cycle: Record of the number of
charging cycles for the installed
battery
Temp: Battery temperature in
Fahrenheit and Celsius
About
Displays transmitter information:
FW: Installed firmware
HW: Hardware version
SN: Serial number
Reset All
Restores all transmitter parameters to
factory settings.
IR Sync
Use IR Sync to form an audio channel between the
transmitter and receiver.
Note: The receiver band must match the band of the transmitter.
1. Select a receiver channel.
2. Tune the channel to an available frequency using
group scan or manually turn to an open frequency.
3. Power on the transmitter.
4. Press the SYNC button on the receiver.
5. Align the IR windows between the transmitter and
the receiver so that the IR LED illuminates red. When
complete, Sync Success! appears. The transmitter and
receiver are now tuned to the same frequency.
9/8/17, 2)16 PM
Page 19 of 32
Advertisement
Table of Contents
