Introduction - Siemens SINAMICS G120 Hardware Installation Manual

Introduction

Overview
The Power Modules belong to the modular family of SINAMICS G120 inverters. A modular
inverter comprises Control Unit and Power Module.
Depending on the power rating in frame sizes FSD ... FSF, the following Power Module
versions are supplied:
● 3 AC 400 V
● 3 AC 690 V
Control Units for the Power Modules
You can operate the Power Modules with a Control Unit from one of the following listed families
from firmware version V4.7 SP6 HF1 and higher.
● CU230P-2
● CU230P-2 BT
● CU230P-2 HVAC
● CU240B-2
● CU240E-2
● CU250S-2
Note
Commissioning the inverter
You must first commission the inverter before you can use it. Commissioning is described in
the operating instructions of the relevant Control Unit.
STO independent of the Control Unit
The Power Modules are suitable for implementing the "Safe Torque Off" (STO) safety function
corresponding to PL e according to EN 13849-1 and SIL 3 to IEC61508.
PM240P-2 Power Modules
Hardware Installation Manual, 11/2016, A5E37800827C AB
22 kW ... 132 kW
11 kW ... 132 kW
Manuals and technical support (Page 89)
STO via Power Module terminals (Page 50).
for line voltages from 3 AC 380 V ... 480 V
for line voltages from 3 AC 500 V ... 690 V
3
17