Hoisting Gear - Siemens SINAMICS G120 Hardware Installation Manual

Installing/mounting
4.4 Mounting the Power Modules
Drilling dimensions and cooling air clearances
Table 4-2
Frame
size
FSD
FSE
FSF
You can mount the Power Modules without any lateral cooling air clearance. For tolerance reasons,
1)
we recommend a lateral clearance of approx. 1 mm.
4.4.2

Hoisting gear

Use crane lifting lugs and the appropriate hoist‐
ing gear when mounting Power Modules.
Power Module weights:
32
Drilling dimensions, cooling air clearances [mm] and fixing [Nm]
Drilling dimensions
h b
430 170
509 230
680 270
Technical data (Page 57).
Cooling air clearances
c Top Bottom
15 300 350
11 300 350
13 300 350
Hardware Installation Manual, 11/2016, A5E37800827C AB
Fixing
1)
Front Screws/torque
100 4 x M5 / 6
100 4 x M6 / 10
100 4 x M8 / 25
PM240P-2 Power Modules