Changing The Display Language; Connecting The Surftab To The Internet; Connecting To A Stationary Wireless Network (Wifi) - TrekStor SURFTAB BREEZE 10.1 QUAD 3G Operating Instructions Manual

14. Changing the display language

a) Call up Settings (see Section 12).
b) Scroll down in Settings and tap "L
c) Tap "L
d) Scroll down until the language you require is displayed.
e) Tap the required language. The Surftab will now use the selected language
as the display language.

15. Connecting the Surftab to the Internet

Connecting to a stationary wireless network (WiFi)

a) Call up Settings (see Section 12).
b) In Settings, tap "W -F ". You are now in the WiFi menu.
c) Use your ingertip to move the slider for WiFi from left to right. The word
"O "appears in the top left of the screen.
The Surftab searches for all available wireless networks nearby and then
displays them as a list.
d) Tap the network you wish to connect to. An input window opens.
e) Enter the network key ("P
selected and tap "C
The Surftab now connects to the wireless network and displays the word
"C " below the selected wireless network if the connection is
successful.
You can now surf the Internet as usual using the Internet browser.
NOTICE
To deactivate the WiFi function, use the tip of your finger to move the WiFi
slider in the top right of the WiFi menu from right to left. The word "O " appears
in the top left of the screen.
" in the following view.
".
&
") of the wireless network you have
22
" (globe symbol).