Transferring Files Between The Surftab And Other Devices; Transferring Files Via Bluetooth - TrekStor SurfTab wintron 7.0 Operating Instructions Manual

12) Transferring files between the SurfTab and other devices

Transferring files via Bluetooth

a) Activate the Bluetooth function on the device you want to connect and
allow the device to become visible to other devices if necessary. To do so,
refer to the operating instructions of the device to be connected.
b) Go to Settings (see Section 9).
c) In Settings, tap "D
left.
d) Move the Bluetooth slider (in the middle of the screen) from left to right.
The word "o
n
Bluetooth function and the SurfTab searches for available devices nearby.
e) Select the device you would like to connect from the list of devices available
by tapping the name of the device. Then tap "p
f ) The SurfTab sends a verification code to the device to be connected. Check
that the code displayed on the device to be connected matches the code
displayed on the SurfTab and confirm with "Y
You may also have to confirm the pairing procedure on the device to be
i
connected.
g) The status message "C
successful pairing.
h) Exit the device settings by closing the window.
i) Open the SurfTab file browser (folder icon on the taskbar) and go to the file
that you would like to send.
j) Tap the file you want to send and hold it for approximately 1 second, then
release. The Context menu appears. Select the "s
"B
luetooth DeviCe
k) Tap the desired device and confirm with "n
The SurfTab now sends the selected file to the desired device.
l) You may also have to confirm receipt of the file on the destination device.
After a successful file transfer, deactivate the Bluetooth function on the SurfTab
i
(and on your destination device) to save energy.
EN
18
" and in the following window tap "B
eviCes
" now appears next to the slider. This activates the SurfTab
" appears under the selected device after
onneCteD
". A list of all paired Bluetooth devices appears.
luetooth
".
Air
" on the SurfTab.
es
" option and then tap
enD to
".
ext
" on the