Changing The Display Language - TrekStor SURFTAB TWIN 10.1 Operating Instructions Manual

If you do not yet have a Microsoft account or are not signed in with it, you must
perform these steps. Open the Windows Store and select the desired app. Click
the app and then click "I
the process of setting up a Microsoft account.
ADVICE
If you set up a Microsoft account and link it to your Surftab, the password for
unlocking the Surftab changes. From now on, you have to enter the password
for your Microsoft account to unlock the Surftab.

17. Changing the display language

Proceed as follows to change the display language:
a) Make sure that your Surftab is connected to the Internet (see Section 14).
b) Call up the settings (see Section 13).
c) In Settings, tap "T
the left. You are now in the "C
d) Now tap "A
e) Scroll to and tap the language you require.
ADVICE
The Surftab jumps back to the "C
the selected language in the list of languages below "A
f) Wait until the "L
the selected language in the list. Now tap the language and then tap
"O ".
g) Tap "D
ADVICE
The Surftab now downloads the language pack and installs it. This process can
take a few minutes. The "L
as the language pack has been installed.
h) Return to the "C
"S " in the upper left area of the window.
i) Tap the selected language and than tap "S
selected language.
j) Restart your Surftab. The selected language now appears in the display.
". An assistant now appears to guide you through
&
" in the centre of the screen.
" under "D
26
" and then tap "R
" window.
R " window, but now displays
" message appears under
" message appears as soon
" window. Tap the arrow to the left of
&
L ".
".
" below the
" on