Connecting Other Devices; Connecting A Usb Device; Connecting A Bluetooth Device - TrekStor SurfTab ventos 9.7 Manual

5) Connecting other devices

5.1) Connecting a PC
A) Connect the Micro-USB connector to the Micro-USB port of the SurfTab
and the other end of the USB cable to a USB port of your computer.
B) Tap on the screen of the SurfTab on "t
C) A moment later, the internal memory of the SurfTab is displayed as an
external drive inside the file explorer of the Computers. From there you
can download files, copy, delete or move them.
If you like to safely remove the SurfTab from the computer, tap on
i
"t usb
uRn off

5.2) Connecting a USB device

USB devices, e. g. a hard drive, can be connected via the Micro-USB port.
It might be that the current supply of the SurfTabs is not enough to fully
i
guarantee the full function of the connected USB device. Therefore provide
extra current for an external hard drive e. g. via a Y cable.
5.3) Connecting a Bluetooth® device
A) Go via "S
ettingS
"o " in order to search for devices nearby.
n
B) Tap now on the device that you would like to connect from the
displayed list by tapping on it.
C) Tap now on "p
device that is supposed to be connected.
5.4) Connecting a TV via HDMI™
A) Go via "S
ettingS
function (a check mark appears on the right side of the picture,
once the function is activated).
B) Now connect a Mini-HDMI™ cable (e. g. available on
www.trekstor-onlineshop.de) with one end to the tablet
and with the other end to the TV.
C) Select via the remote Control of your TV the HDMI™ port, to which
the SurfTab was connected. Surface and contents of the tablets
will now be displayed on the TV screen.
" and disconnect it from the computer.
stoRage
" to "B ®" and set the Bluetooth® function to
Luetooth
" and follow any instructions by the SurfTab or the
air
" to "hDMi™" and activate through tapping the HDMI™
uSB
urn on Storage
".
en
21