Starting Up The Surftab For The Irst Time; Charging The Surftab - TrekStor SURFTAB TWIN 10.1 Operating Instructions Manual

7. Starting up the Surftab for the first time
First unpack your Surftab. Remove all components from the packaging and
completely remove the packaging material, including the protective ilm. Check
to ensure that the delivery is complete (see Section 5). If you ind that there are
missing or damaged components, contact customer service immediately.

Charging the Surftab

Please fully charge your Surftab before you use it for the irst time.
Connect the DC plug of the included power supply to the socket (DC IN) of the
Surftab. Then plug the power supply into an electrical outlet.
The charging LED lights up red during charging. When the battery is fully charged,
the charging LED goes out.
ADVICE
Only leave the power adapter connected to the power socket until the Surftab is
fully charged. Disconnect the power adapter from the socket first and then remove
the charging cable from your Surftab.
ADVICE
The maximum battery life is reached after approximately charging cycles.
ADVICE
We recommend charging the Surftab while it is switched off. This allows you to
get the maximum charging speed.
15