Siemens simatic ET 200SP User Manual page 18

Parameters/address space
4.1 Parameters
Parameters
Reaction to CPU
STOP
Potential group
Due to the limited number of parameters at a maximum of 244 bytes per ET 200SP station with a PROFIBUS GSD
1
configuration, the configuration options are restricted. If required, you can assign these parameters using data rec-
ord 128 as described in the "GSD file PROFINET IO" column (see table above). The parameter length of the I/O module
is 16 bytes.
18
Range of values
Turn off
•
Keep last value
•
Output substitute value 1
•
Use potential group of the
•
left module (module
plugged into a dark-
colored BaseUnit)
Enable new potential
•
group (module plugged in-
to light-colored BaseUnit)
Default Parameter
reassign-
ment in
RUN
Turn off Yes
Use potential No
group of the
left module
Digital output module DQ 8x24VDC/0.5A BA (6ES7132-6BF01-0AA0)
Scope with configuration software,
e.g. STEP 7 (TIA Portal)
GSD file GSD file
PROFINET IO PROFIBUS DP
Channel Module
Module Module
Manual, 09/2017, A5E36107249-AC
1