Maintenance; Optional Accessories; Protecting The Environment - DeWalt dC540 Manual

To remove the sausage holder, reverse the above
procedure.
NoTE: The barrel nut (t) may ocassionally need to
be retighten to ensure the tool functions properly. If
the barrel nut in the carrier becomes loose, use a
13 mm (1/2") square drive tool to retighten.

maintenanCe

Your D WALT power tool has been designed to
e
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
lubrication
This tool requires no lubrication.
NoTE: Periodic lubrication of the
plunger o-ring (z) may be needed during
the life of the caulk gun. To maintain
smooth operation while dispensing
material, apply a light coating of the
provided lubricant to the outside surface
of the o-ring.
CAUTION: Do not lubricate the tool as
it will damage the internal parts.
Cleaning
C AUTION: Risk of damaging tool.
Material left in the cartridge/sausage
holder may dry if left unattended. Do not
attempt to dispense material under this
condition. Follow the manufacturer's
recommendations when using caulk or
adhesive material to reduce the risk of
property damage.
To clean the cartridge holder, follow
manufacturer's recommendations for cleaning
material from nozzle, barrel plunger and plunger rod.
To clean the sausage holder, unscrew nozzle cap
(m) and sausage holder (l) and remove from tool.
Follow the manufacturer's recommendations for
cleaning material from nozzle, barrel plunger, plunger
rod and sausage holder.
Charger Cleaning instruCtions
W ARNING: Shock hazard. Disconnect
the charger from the AC outlet before
cleaning. Dirt and grease may be
removed from the exterior of the charger
using a cloth or soft non-metallic brush.
Do not use water or any cleaning
solutions.

optional accessories

WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D WALT, recommended
e
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.

protecting the environment

Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D WALT provides a facility for the collection and
e
recycling of D WALT products once they have
e
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D WALT office at the address indicated in this
e
manual. Alternatively, a list of authorised D
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
e ng l is h
WALT, have
e
WALT product
e
WALT
e
39