Charging Battery - Polycom KIRK 5020 User Manual

1 To install battery press down back cover and slide it towards the bottom of the
handset.
2 Lift off back cover.
3 Insert battery with the label readable.
4 Press back cover back in locked position (when you hear a click the back cover is in
position).
Note: The product label, including the CE logo, can be found in the battery
compartment.

1.5 Charging Battery

When charging battery for the first time, it is necessary to leave handset in charger for
14-16 hours for the battery to be fully charged.
During normal operation, it takes approximately 6 hours to charge the handset from
fully discharged to its full capacity. Turning the backlight off reduces charging time
with approximately 2 hours (refer to "Turning Backlight Off" on page
9
52).