Speed Dial; Answering Calls; Auto Answer; Mute A Call - Polycom KIRK 5020 User Manual

4.7 Speed Dial

If you have assigned a number to one of the speed-dialing keys 0-9, do the following:
• While on hook, press digit equivalent to number of the contact in the speed dial list
continuously until call is started.
Note: For more information about adding number to speed dial, refer to
Speed Dial" on page

5 Answering Calls

The handset must be subscribed and registered to answer a call. For more information
about subscribing, refer to
When handset rings, display shows the icon for incoming calls
mation appears below if supported by the subscribed system.
• Press to answer a call when your handset rings.
Note: You can distinguish between an internal and external call by the ring tone. The
.
ring tone of an internal call is followed by three short beeps.

5.1 Auto Answer

When auto answer is turned on, the handset automatically goes off hook when an
incoming call arrives.
If subscribed to a wireless solution, the handset automatically goes on hook when calls
are terminated.
Menu
Press
Settings
Scroll to
Auto answer
Scroll to
On
Scroll to
Note: When charging, auto answer is inactive.

5.2 Mute a Call

Silence
• Press

5.3 Reject a Call

Note: Rejecting a call is system dependent. If supported by the subscribed system, do
the following:
31.
"Creating a Login" on page
to enter main menu.
Select
and press
and press
Off Change
or and press
and the ring signal is muted.
.
Select
.
.
24
"Adding to
59.
and the caller infor-