Changing Settings Of Out Of Range; Bluetooth (Only Kirk 5040); Activate Bluetooth Function - Polycom KIRK 5020 User Manual

Menu
Press
Settings
Scroll to
Out of range
Scroll to
On
Scroll to

12.9.1 Changing Settings of Out of Range

The handset offers two types of out of range alerts:
• Icon only
• Tone (beep) + icon
With the out of range indicator turned on:
• If handset is moving out of range, the low signal icon
• If the handset gets out of range, the no signal icon
icon is selected, beeps will appear with short intervals as long as the handset is out
of range.
To change the settings:
Menu
Press
Settings
Scroll to
Out of range
Scroll to
Settings
Scroll to
Scroll to the desired alert and press

12.10 Bluetooth (only KIRK 5040)

Bluetooth allows you to connect the handset to a compatible device with bluetooth
connectivitiy within 10 metres (32 feet). When a wireless headset is connected to the
KIRK 5040, it is possible to disconnect the headset from the handset (12.10.5) , to con-
nect the headset to the handset again (12.10.6), to remove the headset from the device
list (12.10.7), to connect automatically to the handset (12.10.8), to adjust the headset vol-
ume (12.10.9), to switch the audio between the headset and the handset (12.10.10), and
finally it is possible to redial the last number entered in the handset (12.10.11).

12.10.1 Activate Bluetooth Function

To use the bluetooth funcition, you must activate the bluetooth function.
Menu
Press
Settings
Scroll to
to enter main menu.
Select
and press
and press
Off Change
or and press
to enter main menu.
Select
and press
and press
Change
and press
to enter main menu.
Select
and press
.
Select
.
.
.
Select
.
.
Select
.
.
54
will appear in display.
will appear in display. If tone +