Dtmf C Ode - Vertex Standard EVX-5300 Operating Manual

Hide thumbs Also See for EVX-5300:
Table of Contents

Advertisement

c
s
Et ( This function is only available in the EVX-5400 )
oDE
r Press (or press and hold) the assigned PF key to change the 5-Tone encoding
digit.
To change the tones, select the desired digit using the [ P1 ] / [ P2 ] keys (or MH-
's [ A ] / [ B ] keys), then change the number using the [  ] / [  ] keys.
75
A8J
r Press the [ P4 ] key (or MH-75
play indicates "- SET -" briefly, then reverts to the normal channel indication.
You may cancel the new setting by pressing the [ P3 ] key (or MH-75
key). In this case, the display indicates "- CANCEL -" briefly.
You may enter the 5-Tone encoding code directly from the microphone's numeric
key ( [ 0 ] - [ 9 ] ) and [  ] key (wild card), if the optional MH-75
used.
s
D
ial ( This function is only available in the EVX-5400 )
pEED
Your Vertex Standard dealer may have pre-programmed Auto-Dial telephone num-
ber memories into your radio.
To dial a number:
r If the optional MH-75
assigned PF key, then press the microphone's numeric key ( [ 0 ] - [ 9 ] ) corre-
sponding to the Auto-Dial memory number which is provided by your Vertex
Standard Dealer, then press the PTT switch. The DTMF tones sent during the
dialing sequence will be heard in the speaker.
r If the normal (without keypad) microphone is used, press the [  ] / [  ] keys to
select the Auto-Dial memory number which is pre-programmed by your Vertex
Standard dealer, then press the PTT switch. The DTMF tones sent during the
dialing sequence will be heard in the speaker.
DtMF c
s
oDE
Et
( This function is only available in the EVX-5400 and requires the Optional MH-75
Press (or press and hold) the assigned PF key to start storing the DTMF dialing
sequence. After entering to enter all DTMF digits from the MH-75
you can transmit the code by pressing the PTT switch.
22
a
o
dVancEd
's [ D ] key) to store the new setting. The dis-
A8J
microphone is used, press (or press and hold) the
A8J
EVX-5300/-5400 O
pEratIon
16-Keypad Microphone )
A8J
pErating
FCC ID: AXI11144640
IC: 10239A-11144640
's [ C ]
A8J
microphone is
A8J
's keypad,
A8J
M
anual
Vertex Standard LMR, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Evx-5400

Table of Contents