Recording Channel Set Up - ABB SM2000 User Manual

4.6.1 Recording Channel Set Up

Note. Parameters applying only to Advanced configuration are identified
•1 If this parameter is changed, a new internal data file for this recording channel is created. All historical data stored internally for this
channel is lost.
A
.
•1
Select the signal source for the selected channel. This can be
any external analog or digital signal. See APPENDIX 1 for full
list.
Note. The tabs change according to selection.
Note. Setting a channel source to 'None' does
off the analog input to which the channel was previously
assigned – i.e. the analog input continues to be monitored.
To switch off an analog input, set 'Analog I/P Type' for the
required channel to 'Off' – see Section 4.6.2.
Select the color used to display the trace and its short tag on
A
Chart and Digital Indicator views.
Note. The trace color cannot be changed when Basic
configuration is selected.
1st 2nd
Magenta Red
When Advanced configuration is selected, trace colors can
be selected from the following:
Cyan, Magenta, Blue, Dark Cyan, Dark Blue, Yellow, Light
Green, Dark Yellow, Green, Red, Brown, Black
4 CONFIGURATION...
A – Analog Source
B – Digital Source
3rd 4th 5th
Black Green Blue
switch
not
6th
Brown
59