ABB SM2000 User Manual page 20

...2 OPERATION
...2.7 Alarm Event Log
Configuration
Set Up
Filter
Group 1 Alarms
Group 2 Alarms
Operator Messages
Active Transitions Only
Alarm Acknowledge
Group 1 Alarms
Group 2 Alarms
Ch 1.1 Level
Ch 1.2 Pressure
Ch 1.3 In Flow
Ch 1.4 Out Flow
Ch 1.5 Temp
Ch 1.6 Alarm 1
All
18
Select the Configuration level – see Section 4.
Select the Set Up level – see Section 3.
Select the entries displayed in the log.
Notes.
• Hiding and displaying log entries does not affect the recording of events in the log.
• All selected alarm event transitions (from inactive to active, from active to
acknowledged, from acknowledged to inactive, from active to inactive) appear in the
sequence in which they occurred.
• Selecting 'Active Transitions Only' displays entries for alarms when made active and
hides all acknowledged & inactive transistions.
Used to acknowledge active alarms in each of the process groups, either individuallly or
globally.
Note. If neither alarm on a particular channel is configured, the short channel tag is
greyed-out in the menu.
Indicates categories currently displayed.