Security - ABB SM2000 User Manual

...4 CONFIGURATION

4.4.3 Security

User 2
Name Operator 2
Password ****
Access Enabled
46
Change the user name and password used to access the
configuration level when 'Password protection' is enabled –
see below.
Note. User 1 has 'administrator' type privileges and is able
to change the user names and passwords of all other users.
Other users can change only their own user name and
password. For users 2, 3 and 4, access can be enabled or
disabled. If it is disabled then the configuration levels cannot
be accessed using that user name.
When a change to the instrument's configuration occurs, the
user's ID is added to the audit log entry.
Set the method of access to the Configuration level. If
'Password protected' is selected, access is by means of the
password set above.
Note. If 'Switch protected' is selected, access to the
Configuration level for all users is prohibited once the
changes have been saved and made active. Access to the
configuration level can then be achieved only by setting the
security switch to the 'Configuration not protected' position
– see Fig. 4.2.
When set to 'On', access to the Setup level is protected by a
single password for all users.
Displayed only when Setup Level Security is set to 'On'