4.5 Process Group Configuration
System Configuration
Common
Process
Configuration
Group 1
Group 2
I/O
Channels
Modules
Note. If only one Process Group has been selected in the common configuration set up, only one
Process Group icon is displayed in the main configuration window.
4.5.1 Setting the Recording Parameters
N
ote. Parameters marked
Recording
Chart
Bar
Process
Tag 20 Characters
Recording enable source None
Process Group 1
Group 1
Process
Channels
Group 2
Functions
Process Group 2
Fig. 4.8 Selecting Process Group Configuration
B
are displayed only if Basic Configuration is selected – see Table 4.1 and Section 4.4.1.
Digital
Archive
Group 1 Configuration
Recording
Chart
or
Primary sample rate HH:MM:SS:ms
Secondary sample rate HH:MM:SS:ms
Sample rate source None
Enter the Process Group tag that appears in the title bar
when any operator views from that group are displayed.
Set the edge-triggered digital source (e.g. Alarm Signal,
B
Real-time Event) used to enable/disable recording of all
channels in the group.
Enabled
4 CONFIGURATION...
Bar
Process
Digital
Archive
Tag 20 Characters
Recording On, Off
Disabled
49