Parking Brake - Lexus RX300 2003 Owner's Manual

Table of Contents

Advertisement

31R081
"LOCK" – Engine is off and the steering wheel is locked.
The ignition key can be removed only at this position.
You must push in the key to turn it from "ACC" to the "LOCK"
position. The selector lever must be put in the "P" position
before turning the key to the "LOCK" position.
Once you remove the key, the engine immobiliser system is
automatically set. See "Engine immobiliser system" on page
12.
When starting the engine, the key may seem stuck at the
"LOCK" position. To free it, first be sure the key is pushed all
the way in, and then rock the steering wheel slightly while
turning the key gently.
If, in an emergency, you must turn the engine off while the
vehicle is moving, turn the key only to "ACC".

PARKING BRAKE

31R004
To set: Hold the regular brake pedal down with your right
foot. Push down the parking brake pedal with your left
foot.
To release: Hold the regular brake pedal down with your
right foot and push the parking brake pedal with your left
foot. When you lift your left foot, the parking brake pedal
will follow it to the released position.
Before leaving your vehicle, firmly apply the parking brake.
CAUTION
Before driving, make sure the parking brake is fully
released and that the parking brake reminder light is off.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents