Interface Cable - Toshiba E-Studio 202s Operator's Manual For Basic Function

Using the MY-1034 with the printer function
To use the MY-1034 with the printer function, follow these steps to adjust the
settings in the printer driver.
The printer driver cannot be set for use with the MY-1034 when opened from
the application.
1
Click the "start" button.
2
Click "Control Panel", select "Printer and Other Hardware", and
then click "Printer and Faxes".
• In Windows Vista, click "Control Panel", and then click "Printer".
• In Windows 98/Me/2000, select "Setting" and click "Printers".
3
Click the "TOSHIBA e-STUDIOXXXX" printer driver icon and
from the "File" menu select "Properties".
• In Windows Vista, from the "Organize" menu select "Properties".
• In Windows 98/Me, click the "TOSHIBA e-STUDIOXXXX" printer driver
icon, select "Properties" from the "File" menu, and then click the "Setup"
tab.
4
Click the "Configuration" tab.
5
Select "Two trays" for "Input tray
option", and click "OK".
The printer driver closes. This completes
the settings needed to use the MY-1034.

Interface cable

Please purchase the appropriate cable for your computer.
USB interface cable
USB cable that supports USB 2.0.
8
63