Table of Contents
Advertisement
30 July, 1999 (Revised)
DEVELOPMENT UNIT
6.9.6 TONER DENSITY SENSOR REPLACEMENT
[A]
A269R318.WMF
1. Collect the developer. (See 6.9.1.)
2. Replace the toner density sensor [A] (2 screws).
3. Install new developer.
4. Follow the flow chart at the end of the developer installation procedure. (See
6.9.2.)
NOTE: In this case, "TD sensor initialization" and "Developer agitation" are
required only for the color whose TD sensor and developer are replaced.
6-61
Advertisement
Table of Contents
