Auto Power Save Setting - Polaroid User Guide User Manual

• Auto Power Save Setting

The picture viewer performs the following power save operation to
conserve battery power.
OFF
1/3/5 MIN
You can change the power save setting according to the following steps.
1. Set the picture viewer to SETUP mode.
2. Press the
3. Press the
POWER OFF".
4. Press the
5. Press the
desired setting.
6. Press the
button to exit.
NOTE:
Auto power off is automatically disabled under any one of the following
conditions.
- While playing a video clip.
- While a slide show is undergoing.
- While the picture viewer's USB port is connected to a computer or other
external devices, or while the picture viewer is being controlled by an external
device.
Polaroid izonePHOTO™ Portable Digital Picture Viewer User Guide
www.polaroid-digital.com
The power save feature is not activated.
The picture viewer is designed to switch off
automatically to save battery life after the specified
period of inactivity.
button.
or button to select "AUTO
button.
or button to select the
button to confirm, or the
FORMAT
BEEP SOUND
AUTO POWER OFF
LANGUAGE
TV OUT
DEFAULT SETTING
AUTO POWER OFF
OFF
1 MIN
3 MIN
5 MIN
15