Auto Power Save Settings - Polaroid PDC 4350 User Manual

• Auto Power Save Settings

The camera performs several power save operations to conserve battery
power.
You can change the power save setting
according to the following steps:
1. Turn on the camera and set the camera to
Capture mode.
2. Press the
3. Press the right button to select Setup
Menu.
4. Press the down button to select the
Power Save option.
5. Press the right button to enter the Power
Save submenu.
6. Press the up or down button to select
"Off", "1 min", "3 min" or "5 min".
1/3/5 minute(s): The camera is designed to switch off automatically
Off:
7. Press the
NOTE:
• Auto power off is automatically disabled under any one of the following
conditions.
- While a slide show is playing.
- While the camera's USB port is connected to a computer or other external
devices, or while the camera is being controlled by an external device.
- While the AC adaptor is connected to the camera.
• This setting is also available in Video and Playback modes.
14
button.
to save battery life after one/three/five minute(s) of
inactivity.
The power save function is not activated.
button to confirm, or press the
Polaroid PDC 4350 Digital Camera User Guide
button to cancel.
www.polaroid-digital.com