Cdma Phone Activation; Verizon Wireless Activation - Motorola MC75A Integrator Manual

6 - 2 MC75A Enterprise Digital Assistant Integrator Guide

CDMA Phone Activation

CDMA phone service is available from a number of service providers including Sprint
In addition to service activation for each provider, various settings may be required for the MC75A to operate
as a phone. There can be different Activation Wizards depending upon the carrier. Verizon Wireless and Sprint
use an automatic activation processes. All other carriers use the manual activation process.

Verizon Wireless Activation

The Activation Wizard allows automatic activation. To activate the MC75A using the automated service, the
MC75A attempts to call the network on a special number that automatically downloads the phone number and
identification codes from the network.
Verizon Wireless automatically downloads the provisioning data. This process is invisible to the user and
occurs once, after account activation, during the first data connection attempt.
NOTE After an
service provider loads are downloaded to the
provisioning information.
To activate the phone using the Verizon Wireless automated service:
Ensure the MC75A is in a strong signal area.
1.
The Activation Wizard automatically starts whenever the phone is turned on. If the wizard does not appear,
2.
tap >
Start Phone
Verizon Activation Wizard
Figure 6-1
Tap Auto to connect to the Verizon Wireless Network to automate activation. Automated activation
3.
provides all required codes and identification numbers over the network. No additional activation setup is
required.
Tap to close the
4. Finish
NOTE If activation was not successful, contact the service provider.
The phone can be used in approximately four hours, depending on the network provider load.
5.
MC75A
is provisioned for Verizon Wireless service, it is strongly recommended that no other
> >
Menu Activation Wizard...
.
Activation Wizard
MC75A
and no changes are made to any of the
.
® ®
and Verizon Wireless .