OTHERS
8. OTHERS
8.1 OZONE FILTER REPLACEMENT
[H]
[G]
[F]
NOTE: Take care not to damage the mylars [A] on the rear feed table.
1. Open the fusing exit cover [B] and exit unit [C].
2. Remove the copy tray [D].
3. Remove the rear feed table assembly [E] (2 screws and 1 connector).
4. Unhook the blower duct [F] and remove.
5. Unhook the fan support plate [G] and remove.
6. Replace the ozone filter [H].
NOTE: When reinstalling the rear feed table assembly, fix the 2 screws
[I] while pushing the assembly.
[E]
[I]
[B]
[C]
5-44
[A]
A174R542.wmf
25 July 1996
[D]
[I]
A174R543.wmf