C7. Head Movement
Head Movement
Data Width
Printer Full Width
[OK] Done [↖] Back
The head movement will limit the carriage pass to the image size (Data Width) or to the Printer Width (Printer Full
Width).
Tips : If you wish to optimise the printing quality, better use [Full Width] settings instead of [Data Width]
C8. Multi‐Strike Printing
Multi‐Strike Printing
OFF
Range : OFF, 2‐8
Current: OFF
[OK] Done [↖] Back
The multi‐strike printing (or multiple layers) settings will allow to add ink density, especially for transparent media, e.g
backlit film, where you need to increase the ink density. Input the desired value from 2 to 8.
Tips : the multi‐strike printing will reduce the printing speed. More you use multiple layers, more you increase the printing time
C9. Feed Speed
Feed Speed
Lv 1
Range : Lv 1‐2
Current: Lv 1
[OK] Done [↖] Back
There are two Feed Speed settings 1 or 2. Use a slower feed speed in case of Media wrinkles, sticks pages effect
during printing or torn effect. The lower is the value, the slower is the print speed.
Epson Engineering Europe
(see section 3. TROUBLE SHOOT QUICK GUIDE) for example
(used for transparent media)
SC‐S30600/610 Technical Guide
P a g e
| 15