Interface Numbering; Regulatory Compliance - Cisco NCS 4216 Manual

Hide thumbs Also See for NCS 4216:

Table of Contents

Interface Numbering

Following is an explanation of the slot or port numbering:

• The numbering format is Interface type slot or interface number. Interface (port) numbers begin at

• Interface module slots are numbered from bottom to top, with logical interfaces on each module numbered

The following commands display the active RP slot number. The interface module is referenced as 1/x instead

of 0/x:

• show diag all eeprom detail

• show platform software trace message iomd

• show platform software agent iomd

• show platform software peer shell-manager brief

• show platform software peer chassis-manager

• show platform software memory iomd

• set platform software trace iomd

For regulatory compliance and safety information, see the

for the Cisco NCS 4200 Series

Cisco NCS 4216 Hardware Installation Guide

logical 0 for each interface type.

from left to right. Interfaces are hard-wired. Therefore, port 0 is always logical interface 0/0, port 1 is

always logical interface 0/1, and so on.

Aggregation Routers document.

Cisco NCS 4216 Overview

Regulatory Compliance and Safety Information

Table of Contents