Table of Contents
Advertisement
Cisco NCS 4216 Overview
OC-192 Interface Module with 8-port Low Rate CEM Interface Module (10G HO / 10G LO)
The OC-192 interface module with 8-port low rate CEM interface module is a high density combination
interface module. This module supports 1 OC-192 port and 8 low rate CEM or 1 Gigabit Ethernet port.
Figure 9: OC-192 Interface Module
For more information about installing the OC-192 interface module, see the
section.
48 X T1/E1 CEM Interface Module
The 48 X T1/E1 interface module provides connectivity for up to 48 x T1/E1 ports through 3 high-density
connectors on the front panel. Each port supports 16 TX and RX ports. For information on LEDs, see the
Troubleshooting
Figure 10: 48 x T1/E1 Interface Module
section.
Interface Modules
Interface Module Installation
Cisco NCS 4216 Hardware Installation Guide
19
Advertisement
Table of Contents
