Cisco NCS 4216 Manual page 11

Cisco NCS 4216 Overview
• 8-port 10 Gigabit Ethernet Interface Module (8X10GE)
• 1-port 100 Gigabit Ethernet Interface Module (1X100GE)
• OC-192 Interface Module with 8-port Low Rate CEM Interface Module (10G HO / 10G LO)
• 48 T1/E1 TDM Interface Module (48XT1/E1)
• 48 T3/E3 TDM Interface Module (48XT3/E3)
Use the hw-module subslot default command before performing a swap of the modules to default the interfaces
on the interface module.
See the Cisco NCS 4216 Router Hardware Installation Guide for information on Supported Interface Modules
on the RSP.
Table 3: NCS4216-RSP Supported Interface Modules and Part Numbers
RSP Module
NCS4216-RSP
1 Only limited support to slots 0,1,2,5,6,9,10,11,12,13,14 and 15. There are slot specific restrictions to use NCS4200-1T16G-PS interface modules (IMs) with
other IMs in the chassis. Contact Cisco Sales/Support for the valid combinations.
Interface Modules
SFP Combo IM—8-port Gigabit
Ethernet (8X1GE) + 1-port 10
Gigabit Ethernet (1X10GE)
1x100G Interface module
2x40G Interface module
1-port 10 Gigabit Ethernet (1 X
SFP+) / 1-port Gigabit Ethernet
(1 X SFP) / 2-port Gigabit
Ethernet (1 X CSFP) and
16-port Gigabit Ethernet (8 X
CSFP) / 8-port Gigabit Ethernet
(8 X SFP) Interface Module
8x10G Interface module
OC-192 Interface Module with
8-port Low Rate CEM Interface
Module (10G HO / 10G LO)
48XT1/E1 Interface module
48XT3/E3 Interface module
Part Number
NCS4200-1T8LR-PS
NCS4200-1H-PK
NCS4200-2Q-P
NCS4200-1T16G-PS
NCS4200-8T-PS
NCS4200-1T8S-10CS
NCS4200-48T1E1-CE
NCS4200-48T3E3-CE
Cisco NCS 4216 Hardware Installation Guide
RSP Modules
Slot
2,5,6,9,10,13,14,15
7,8
3,4,7,8,11,12
0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
1
and 15
3,4,7,8,11,12
3,4,7,8,11,12
0,1,2,3,4,5,6,7,8,9,10,13,14,15
0,1,2,3,4,5,6,7,8,9,10,13,14,15
11