Cisco NCS 4216 Manual page 17

Hide thumbs Also See for NCS 4216:

Table of Contents

Cisco NCS 4216 Overview

2-port 40 Gigabit Ethernet QSFP Interface Module (2X40GE)

Figure 7: 2x40 Gigabit Ethernet Interface Module

The dual port 40 Gigabit Ethernet interface module supports the 40 Gigabit Ethernet port. The 40G interface

is supported using QSFP+ optics. The figure above shows the interface module.

For more information about installing a 2X40 GE module, see the

1-port 10 Gigabit Ethernet (1 X SFP+) / 1-port Gigabit Ethernet (1 X SFP) / 2-port Gigabit Ethernet

(1 X CSFP) and 16-port Gigabit Ethernet (8 X CSFP) / 8-port Gigabit Ethernet (8 X SFP) Interface

Module

The NCS4200-1T16G-PS interface module has the flexibility to support SFP+/SFP/CSFP on the modules as

mentioned below:

• 1-Port 10 Gigabit Ethernet Small Form-Factor Pluggable (SFP+) interface supports one of three modules

as 1xSFP+, 1xSFP or 1xCSFP.

Interface Modules

Interface Module Installation

Cisco NCS 4216 Hardware Installation Guide

section.

Table of Contents