Motorola iM1000 User Manual page 26

.
32. Click "Add". The Add RAS Device window opens.
If a modem is already inserted in the same COM port as the
data-capable modem, click "Remove" to remove it and then
click "Add".
33. Make sure that the COM port of your iX1000 modem is selected
(COM1 in this example).
34. Click "OK". The Remote Access Setup window now shows the added
COM port. Click "Continue".
35. Click "Close" on the Network Services Selection window.
36. The Computer Restart window opens. Click "Yes"
INSTALLATION INSTRUCTIONS
Figure 30. RAS Access Setup Window
N O T E
Figure 31. Add RAS Devices Window
25