Connecting to the Internet via Circuit-Switched
Data
Circuit-switched data communications use AT commands, which are issued
by your computer to your modem or, during fax transmissions, to the
modem at the other end of the connection.
AT commands refer to Hayes®-compatible modem commands.
Make sure you have a Motorola iDEN data-enabled modem definition
installed. For more information, see "CONFIGURING YOUR MODEM"
on page 31.
To make a circuit-switched data connection:
1. From your Windows 95, desktop, double-click "My Computer".
2. Double-click "Dial-Up Networking". The Dial-Up Networking
window opens.
3.
Figure 63. Dial-Up Networking Window
3. Double-click "Make New Connection". The Make New Connection
window opens.
STARTING THE INTERNET CONNECTION
Figure 62. My Computer Window
2.
47