Wall Mounting Instructions - Clarity C460 User Manual

inSTALLATion

Wall Mounting instructions

The phone unit may be mounted on a standard wall plate. This will require the usage
of the wall mount bracket and the short telephone line cord.
Remove the insert in the cradle of the base. Push the small tab on the back of the
insert and lift the insert away from the base.
To install the wall mount bracket, insert the four (4) tabs of the bracket into the slots
on the bottom of the base.
Plug one end of the short telephone line cord into the jack marked LINE located on
the back of the telephone.
Insert the plug of the AC Adapter into the port on the back of the phone labeled AC
Adapter. Then plug the adapter into the wall outlet.
Align the keyhole slots on the bottom of the phone base with the wall plate studs
and slide the base of the phone downward to secure it on the wall.
Place the handset inside the cradle. The handset should sit in a vertical orientation,
where the screen faces outward.
At this point the phone should be ready to use. Press the speaker phone button on
the base and listen for a dial tone.
If the unit does not light up at all, check the AC Adapter connections on the back of
the phone and into the wall.
If the unit lights up but there is no dial tone, check the telephone cord connections
to ensure they are secure. If there is still no dial tone, test the unit using a different
wall jack.
15