Edit Mode; Changing Unit Measures (English Imperial/Metric) - Schwinn IC3 Assembly And Owner's Manual

Auto Shut-Off (Sleep Mode)
If the Console does not receive any input in approximately 4 minutes, it will automatically shut off. The LCD display is off
while in Sleep Mode.
Note: The Console does not have an On/Off switch.
Resistance Adjustment
To adjust the resistance and workload, turn the resistance adjustment knob.

Edit Mode

To set a TIME, CALORIES or DISTANCE goal for your workout, push the MODE button to move to the desired field. The
field will blink. Use the Up and Down arrow keys to adjust the value.
Note: To reset the value to zero (0), push RESET.
Push MODE to move to the next field.
To exit from Edit Mode, start pedaling.

Changing Unit Measures (English Imperial/Metric)

The default distance unit is kilometers (K). You can switch units between kilometers and miles before you start a workout,
or after you reset the Console. To change the units, push UP and DOWN together and hold 3 seconds. When the display
begins to blink, use the arrow button to change the units (K or M). Press any key to save.
21