4
Disassembly/Assembly > Image Formation System > Removing the ITB Unit > Procedure
Removing the ITB Unit
■ Procedure
NOTE:
If the duration level of the ITB Unit and that of the Secondary Transfer Outer Roller Unit
are not equal, a color displacement may occur in the output image.
CAUTION:
• Place the paper [1] on a level space so as not to damage the ITB [2].
4
Disassembly/Assembly > Image Formation System > Removing the ITB Unit > Procedure
F-4-273
[2]
[1]
F-4-274
CAUTION:
• Do not damage the ITB [1] when disassembling/assembling.
• When removing the ITB Unit, do not hold the 2 Push Levers [1] to hold the unit.
4-112
F-4-275
[1]
F-4-276
4-112