JVC KD-SH77R Service Manual page 9

Removing the lifter board
Prior to performing the following procedure, remove
the top chassis assembly and thefront panel
assembly.
1. Disconnect the flexible wire from connector CN702
on the main board.
2. Remove the four screws R
bracket on both sides of the body.
3. Push the pin of the joint c on the front of the front
bracket to release the lock lever.
Front bracket
Fig.20
(See Fig.17 to 23)
attaching the front
Joint c
Lock lever
Main board
CN702
Fig.17
Front bracket
R
Fig.18
Fig.19
KD-SH77R/KD-SH55R
Front bracket
Front bracket
R
1-9